We will be out of office 12/23 - 1/1. Happy Holidays!
Limited Edition: eeBrakes Magnum
Previous slide
Next slide

Helm MKII AIR 27.5

29" - $1,099.99
27.5" - $1,099.99 $659.40



The Helm MKII is our first major revision of the Helm fork lineup and improves on its predecessor in nearly every way.

The Helm MKII includes a newly designed damper featuring a new compression and mid-valve circuit for increased support and control while a new SKF oil seal head and 2.5 weight damper oil reduce friction and provide a more supple ride-feel.

All Helm MKII forks are built to order by hand in our facility in North Carolina, USA and will ship in 7-14 days.

Orders containing suspension are made to order and ship in 7-14 days.

All 29″ fork returns are subject to a 20% restocking fee.

All 27.5″ forks are final sale.

Limited Edition: Check out our full collection of these highly sought-after Helm forks.

Build your perfect ride

"Mixing incredible levels of control, impressive levels of small-bump sensitivity and bucket loads of adjustability leaves the door wide open when searching for that ultimate set up."

– Jim Bland, World Cup mechanic

Description

Features

Fully Revised Damper Tune

  • New compression and midvalve circuit for increased support and control
  • New SKF low friction oil seal head cartridge
  • High performance damper oil from Motorex

New SKF low friction wiper seals installed in the castings.

Redesigned Air Spring

  • Increased air volume for better traction and suppleness
  • New air piston for reduced friction
  • New threadless air seal head for easier travel change

Technical Documents

Additional information

Weight

2070 grams

Damping

High Speed Compression, Low Speed Compression, Low Speed Rebound

Adjustments

High speed compression (10 positions)
Low speed compression (17 positions)
Low speed rebound (10 positions)
Air volume adjust (8-positions)
Independent positive air spring
Independent negative air spring
Indexed travel adjust system

Spring

Double-Air spring system. High volume positive and negative air springs

Stanchion Diameter

35mm

Minimum Brake Rotor Size

180mm.  *If you are using a Hope Tech brake on a Helm fork, you will need to use a 200mm rotor with appropriate adapter.

Travel

Optimized for 130 – 170mm of travel

Axle / Spacing / Offset

"D-Loc" 15mm Bolt-on thru axle system / 15mm x 110 BOOST spacing / 44mm

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In

Features

The Helm MKII is our first major revision of the Helm fork lineup and improves on its predecessor in nearly every way.

Fully Revised Damper Tune

  • New compression and midvalve circuit for increased support and control
  • New SKF low friction oil seal head cartridge
  • High performance damper oil from Motorex

New SKF low friction wiper seals installed in the castings.

Redesigned Air Spring

  • Increased air volume for better traction and suppleness
  • New air piston for reduced friction
  • New threadless air seal head for easier travel change

Technical Documents

Related Reviews

Add a review
You must be logged in to post a review Log In
4.8
Based on 22 reviews
5 star
82
82%
4 star
14
14%
3 star
4
4%
2 star
0%
1 star
0%
Showing 3 of 22 reviews (4 star). See all 22 reviews
Dominic
Dominicus
Verified OwnerVerified Owner
4/5

Nice fork, but don’t care for neg chamber filling process. Not sure if or how much air is transferring to the neg side when pressing the valve. Would rather have another shreader valve to fill the chamber.

Verified reviewVerified review - view original

2 months ago
Louis Gomez
Louis Gomezus
Verified OwnerVerified Owner
4/5

Soft paint finish on lowers mars and scrapes far to easily, otherwise this fork is flawless. Dampening works as advertised and it is very versatile and user friendly. I would buy another.

Verified reviewVerified review - view original

9 months ago
Anonymous
Anonymousca
Verified OwnerVerified Owner
4/5

Only have a few rides on the fork, feels good so far. Not sure I like the negative chamber set up, seems to want to suck my fork down. Think I’ve got it sorted out now. Clearance seems a little tight with a Helm fender installed. Not sure I could get a 2.6 or larger tire in there.

Verified reviewVerified review - view original

2 years ago