PayPal now available at checkout
Free US Shipping On Orders $99+
Previous slide
Next slide
Cane Creek Logo
Stainless Steel

Hellbender 70 Bottom Bracket

Value Meets Performance

2 reviews|23 answered questions

The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance.


  • 440C Stainless steel bearings
  • Machined aluminum cups
  • Excellent durability and corrosion resistance
  • 1-Year Warranty
  • Precision engineered in Fletcher, NC

Note: Bottom brackets do not come with spacer kits. If needed, please select a spacer kit from the product menu above and add to cart.

Build your perfect ride



Providing excellent durability and corrosion resistance, the Hellbender 70 Bottom Bracket will be an impactful and lasting upgrade to any bike.

Cane Creek Hellbender 70 Bottom Bracket

Stainless Steel Bearings

Featuring 440C stainless steel bearings, a dual lip seal, and marine grease. 

30mm, 29mm (DUB), and 24mm (Shimano) bearing options.

HB70 Cups

Machined Aluminum Cups

All-black anodize machined aluminum bottom bracket cups.

Available is BSA threaded, PF30, BB30, P41/92, and T47 variations.


All Cane Creek Bottom Brackets are precision engineered in Fletcher, NC.  They are premium bottom brackets designed to provide riders with the same quality, performance and durability that they have come to expect from Cane Creek.  

Each Cane Creek Bottom Bracket is backed by our unsurpassed commitment to customer service – for any questions about our bottom brackets, feel free to reach out, or visit our support center.

Additional information


Machined Aluminum Cups


Anodize Black


440C Stainless Steel

Spindle Diameter

30mm – PF41/92 is 30mm spindle diameter only
29mm (DUB)
24mm (Shimano)

External Cup Installation Tool

12 notch 46mm tool (Easton/RaceFace)

Bottom Bracket Variations and Weights

BSA Threaded (30mm bearing) – 92g
PF30 (30mm bearing) – 123g
BB30 (30mm bearing) – 100g
T47 (30mm bearing) – 141g
PF41/92 (30mm bearing only) – 78g


1 year

2 reviews for Hellbender 70 Bottom Bracket

There are no reviews yet

Add a review
You must be logged in to post a review Log In

Q & A

Hi, i have a Surly Krampus with 73mm BSA BB. I just odered the Hellbender BB. I am now a bit confused. The old Sram BSA DUB BB has on the right side (drive) a 4.5mm spacer for the crank. The Hellbender has just a 3 mm spacer. do i need to add another additional 1,5mm spacer, to match and maintain the width and the CL ? Martin asked on June 21, 2024

Hello, we would recommended measuring the BSA Cups width (Ours vs SRAMS) to confirm they are the same, if they are the same width, then yes, you would need to use 4.5mm in spacers on the drive side to obtain the same fitment.

Andy Bennett answered on June 21, 2024 store manager

Ok, thx for the answer. The CC Hellbender is 97,3 mm installed width incl that one spacer included and the Sram BB is incl that 4,5mm spacer 99.6 mm. So i will add another 2,5 mm spacer to the Hellbender to have almost a perfect fit.

Martin answered on June 25, 2024
(1) (0)
Which side of the dust cover should face the bearing? Greg asked on May 14, 2024

Hello, please email us at and we can help you with your headset question in more detail. Thanks.

Andy Bennett answered on May 15, 2024 store manager
(0) (0)
I have a Surly Big Fat Dummy with a RaceFace X-type BB. Looking to upgrade to a more impervious and longer lasting BB. The frame spacing is 100mm. Do you have a BB that would fit? Eric asked on March 23, 2024

Hello, yes, our BSA Threaded Bottom Bracket will work with a 100mm, you will not be able to use the inner sleeve, however, the cups will thread in just fine.

Andy Bennett answered on March 25, 2024 store manager
(0) (0)
Can the BB30-24 BB be used in an 83mm BB30 frame? I have a 2018 S-Works Demo with 42x83mm shell. Is the thread long enough to have good engagement in a wider shell? Duck asked on March 5, 2024

Hello, yes, our BB30 can be used with a 83mm BB Shell/Frame.

Andy Bennett answered on March 5, 2024 store manager
(0) (0)
Can /I covert a hellbender 70 to 110 later on paul asked on January 7, 2024

The two headsets use the same bearings and sealing, so performance-wise they are nearly identical. The main difference in cost is the quality of the finsih, and laser details on the 110 cover and cups as well as the lifetime guarantee that we sell with the 110 series products. You can think of the decision to purchase a 110 vs a 70 series as the decision to purchase the lifetime insurance policy for your headset :)

Will Hart answered on January 9, 2024 store manager
(1) (1)

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.



An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.



An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Technical Documents

Related Reviews

Add a review
You must be logged in to post a review Log In
Based on 24 reviews
Showing 1 of 24 reviews (1 star). See all 24 reviews
Alejandro Enriquez
Alejandro Enriquezus
Verified OwnerVerified Owner

Never received.

Verified reviewVerified review - view original

6 months ago

Sign Up To Get 15% Off Your First Order!


* indicates required