Free Shipping US Orders $99+

Cane Creek Logo

Hellbender 110 Bottom Bracket

The Absolute Best


The Hellbender 110 Ceramic uses the highest level of bearing technology available.

Our finest level of Hellbender bottom bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen-infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. Silicon Nitride is many times harder than steel, and as a result, increases the lifespan of this bottom bracket dramatically.

Like our 110 headsets, Hellbender 110 Ceramic provides the ultimate peace of mind. With the complexities of the modern bicycle, this ‘backbone’ component should not be one you have to worry about replacing.


  • 100% Lifetime Guarantee
  • Enduro XD-15 ceramic bearings
  • Machined aluminum cups
  • Kluber NBU52 Grease

Note: Bottom brackets do not come with spacer kits. If needed, please select a spacer kit from the product menu above and add to cart.

Build your perfect ride



We are so confident that this bottom bracket technology is the highest standard of quality that it has earned the right to be called 110 and includes the lifetime guarantee that has become synonymous with the Cane Creek 110 name.   

Cane Creek Hellbender 110 bottom bracket

Machined Aluminum Cups

Dual stage anodize black and gold machined aluminum bottom bracket cups.  Available in BSA threaded, BB30, PF30, and T47 variations.  30mm crank spindle only.

XD 15 bottom bracket bearing with the seal pulled off exposing the internals of the bearing

Kluber NBU52 Grease

This grease runs better and smoother with time, and is highly resistant to being washed out.  It’s engineered to stick to the balls and continually be pulled back into the ball path where it is needed.



The race material is an advanced stainless alloy that is nitrogen infused and will not rust or corrode.

The ceramic ball bearings are made from pure silicone nitride material with extreme high density and uniform compaction. They are 60% lighter weight and seven times harder than steel ball bearings.

Additional information


Machined Aluminum Cups


Dual Stage Anodize Black and Gold


Ultra premium, Enduro XD-15 ceramic, radial bearings with nitrogen infused, stainless steel races

Spindle Diameter

30mm only

External Cup Installation Tool

12 notch 46mm tool (Easton/RaceFace)

Bottom Bracket Variations and Weights

BSA Threaded – BAI0179 – 80g
BB30 – BAI0180 – 93g
PF30 – BAI0181 – 115g
T47 – BAI0182 – 132g


There are no reviews yet.

Be the first to review “Hellbender 110 Bottom Bracket”

Your email address will not be published. Required fields are marked *

Q & A

What 110 BB would fit my CruzBike S40 frameset Chuck, Gary asked on September 5, 2023

Cruz lists your S40 bike as using a "Bottom Bracket Driveline 68mm English - External Bearing". This would be our Hellbender BSA bottom bracket. This comes in several sizes depending on your cranks' spindle diameter.

I could not find the crank spindle diameter but its likely 24mm or 30mm. If you can contact Cruz Bikes for this information (Crank Spindle Diameter) we can help you pick the correct bottom bracket... email for more help.

Ben Rea answered on September 6, 2023 store manager
(0) (0)
What BB do I need , I have a raceface 73mm BB NOW Wally asked on August 24, 2023

BB size depends on the frame and crank being used but we do offer BBs for 73mm wide bottom bracket shells. Call or email with the make/model/year of the bike and the crank you intend to use and we can help source the correct BB.

Ben Rea answered on August 28, 2023 store manager
(0) (0)
What thoughts and/or plans, if any, might Cane Creek have for developing an 'internal bearing' iteration of the T47 bottom bracket? ANDREW FITZGERALD, Kaikōura, NZ asked on August 23, 2023

You are in Luck! Our Hellbender 70 T47i bottom bracket will be available VERY soon. Stay Tuned...

Ben Rea answered on August 28, 2023 store manager
(0) (0)
Hi, I have a 2022 Trek Slash 9.8 XT with a Shimano Shimano XT M8120, 30T, 55 mm chain line, 170 mm length cranks and Shimano BB-MT501 BSA bottom bracket. Which 110 would work on this bike? Also if the cranks need to be changed, that's ok as I am looking at 5Dev cranks to go with this driveline. Thx! Peter asked on June 22, 2023

Looks like your 2022 Slash uses a BSA threaded BB which is great since that is a solid BB. To use the Hellbender110 you will need a 30mm spindle crank like our eeWings, or Hope, Raceface, and others make cranks with 30mm spindles. 5Dev offers 30mm on their cranks so make sure you choose that spindle size. Make sure to follow the spacing instrucions for the BB and the crank and you're all set.

Our part # for the BSA Hellbender110 BB is # BAI0179

Ben Rea answered on June 22, 2023 store manager
(0) (0)
Hello, i have a Rocky Altitude 2023. It’s a press fit 92mm BB and i have Eewing crankset. Which cane creek BB can i choose ? Merci beaucoup Robin asked on May 13, 2023

You will need a BB92 bottom bracket with a 30mm spindle. Unfortunately, this is not available in the Hellbender 110, and you will have to downgrade to the Hellbender 70 ( in order to get a bottom bracket that will fit both the bike and the cranks.

Roger answered on May 14, 2023
(0) (0)

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.



An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.



An error occurred when saving your answer. Please report it to the website administrator. Additional information:

Technical Documents

Related Reviews

Based on 3 reviews
5 star
4 star
3 star
2 star
1 star
Showing 2 of 3 reviews (5 star). See all 3 reviews
Verified OwnerVerified Owner

Amazing products!

Verified reviewVerified review - view original

6 months ago
Matt D.
Verified OwnerVerified Owner

The difference in weight and resistance between my old splined BB and this one is too much to describe. It is insane how good of a product this is.

Verified reviewVerified review - view original

6 months ago

Sign Up To Get 15% Off Your First Order!


* indicates required
/ ( mm / dd )
What do you want to receive updates about?

Product Search

Reed Mann

Design Engineer
Name: Reed Mann
Position: Design Engineer
Year started: 2022
Best part of being a part of the Cane Creek family:  It’s very refreshing to work for a small, tight-knit company where we all share the same passions and to develop new products that make cycling better for everyone.
What you’ll find me doing on the weekends: Obviously riding bikes, but also wrenching on bikes or cars, exploring the mountains, and watching F1 races.
How I got here (at Cane Creek): Feeling pretty unfulfilled with a corporate engineering job, I happened to see that Cane Creek was hiring. I jumped at the opportunity to get my hands dirty working on the latest bike tech and was fortunate enough to be offered the position.