Hellbender 70 Bottom Bracket

Additional information

Materials	Machined Aluminum Cups
Finish	Anodize Black
Bearings	440C Stainless Steel
Spindle Diameter	30mm – PF41/92 is 30mm spindle diameter only 29mm (DUB) 24mm (Shimano)
External Cup Installation Tool	12 notch 46mm tool (Easton/RaceFace)
Bottom Bracket Variations and Weights	BSA Threaded (30mm bearing) – 92g PF30 (30mm bearing) – 123g BB30 (30mm bearing) – 100g T47 (30mm bearing) – 141g PF41/92 (30mm bearing only) – 78g
Warranty	1 year

Reviews

There are no reviews yet.

Be the first to review “Hellbender 70 Bottom Bracket”

Q & A

I see that your BSA threadedBB for DUB cranks only supports 68/73 mm wide shells. Any chance you will make them available for 83 mm wide shells? I have a 2020 Cannondale Habit 6 that requires an special Cannondale AI offset crank and a 83 mm BB shell to get the 55 mm chainline. John Smith asked on August 29, 2023

Our BSA BBs will work on 83mm shells but you will not be able to use the plastic spindle sleeve that comes with it. That may not be important to you if you do not have internal cable routing via the BB shell. The bearing cups, etc are the same as BSA BBS for 83mm shells...

Ben Rea answered on August 31, 2023 store manager

(2) (0)

Is this compatible with eagle AXS Crank? César G asked on August 28, 2023

Yes. The AXS cranks use DUB sizing on the spindle so make sure you choose the DUB Hellbender 70 in whichever size BB your bike requires...

Ben Rea answered on August 29, 2023 store manager

(0) (0)

what bottom bracket do i need for a 2024 slash 7 with raceface Era Crankset 165mm Stealth 30mm spindle and the original bottom bracket was a Shimano BB-MT501 BSA owen asked on August 12, 2023

Your 2024 Slash uses a BSA threaded bottom bracket. To use your RaceFace cranks with a 30mm spindle, you need our BSA30 BB. You have two options...

Hellbender 70: Stainless Steel bearings - part # BAI0143

Hellbender 110: Ceramic Bearings with a lifetime guarantee - part # BAI0179

Ben Rea answered on August 16, 2023 store manager

(1) (0)

Will this bottom bracket be compatible in Bottom Bracket Shell Width (mm): 68-73mm? For trek rosco 7 2023 Eugene asked on August 3, 2023

Yes our BSA bottom bracket will fit your Roscoe. If you are using the stock Shimano crankset you will need our 24mm spindle version. Part number: BAI0186

Ben Rea answered on August 3, 2023 store manager

(1) (0)

I am running a RaceFace Next carbon crank - 30 mm spindle on a 2022 Yeti SB130. Looking to upgrade as the RF pressfit is problematic for me. Can you recommend a Hellbender Model Thanks Tim asked on July 31, 2023

Your 2022 SB130 uses a BB92 bottom bracket which we and others call PF92/41. We only offer this BB for cranks using 30mm spindles so as long as you have a RaceFace, Hope, eeWings, or other 30mm spindle crank this will work great...

our part number: BAI0159 - BB - HELLBENDER70 - PF41 - 30MM - ASSY - BOXED

Ben Rea answered on August 3, 2023 store manager