Menu
The Cane Creek Computer Mount is a clean, centralized mounting solution for all Garmin and Wahoo cycling computers. It attaches directly to the faceplate on most traditional stems and offers a wide range of positions and angles to allow you to put your computer exactly where you want it.
An optional Accessory Mount allows you to add a headlight or action camera to the same clean & centralized arrangement.
Available in brightly anodized colors through our Chroma Studio collection.
Note: Fits nearly all conventional stems, with a center-to-center faceplate bolt distance of 22-35mm and an M5 faceplate bolt (roughly 5mm major thread diameter).
The Cane Creek Computer Mount is the most modular and adjustable stem-mounted GPS computer mount on the market. With 4 mounting orientations, fore/aft, and angle adjustments you can dial in your setup for any size GPS computer (Garmin and Wahoo inserts included in the box). Add an accessory mount for a light or any other accessory for an ultra-clean, clutter-free handlebar.
The Cane Creek Computer Mount is the most modular and adjustable stem-mounted GPS computer mount on the market. With 4 mounting orientations, fore/aft, and angle adjustments you can dial in your setup for any size GPS computer (Garmin and Wahoo inserts included in the box). Add an accessory mount for a light or any other accessory for an ultra clean, clutter free handlebar.
Unlike other mounts, you can use your stem’s top two or bottom two faceplate bolts and a flippable main body to get your computer exactly where you want it. The computer mount can also be installed one bolt at a time so you don’t have to worry about your handlebar moving and having to readjust.
Unlike other mounts, you can use your stem’s top two or bottom two faceplate bolts and a flippable main body to get your computer exactly where you want it. The computer mount can also be installed one bolt at a time so you don’t have to worry about your handlebar moving and having to readjust.
| Computer Mount Weight | 40g |
|---|---|
| Light/Camera Mount Weight | 11g |
| Computer Mount Part # | BAH0050 |
| Faceplate Bolt Width | 22-35mm |
| Mounting Orientations | 4, as well as fore/aft and angle adjustments |
| Cycling Computer Compatibility | Fits all Wahoo computers, all Garmin computers including 1050, and Hammerhead computers w/ Hammerhead's included Garmin adapter |
| Stem Compatibility | Fits nearly all conventional stems, with a center-to-center faceplate bolt distance of 22-35mm and an M5 faceplate bolt (roughly 5mm major thread diameter). |
| 5 star | 0% | |
| 4 star | 100% | |
| 3 star | 0% | |
| 2 star | 0% | |
| 1 star | 0% |
| 5 star | 50% | |
| 4 star | 17% | |
| 3 star | 8% | |
| 2 star | 17% | |
| 1 star | 8% |
Verified OwnerThe mount is very customizable. The one weakness in the design is the pivot point that needs to be tightened to 3 nm. This is especially important if riding on rougher terrain such as gravel. I recommend making the tightening screw larger to make it easier to reach recommend tension without stripping the bolt and possibly including extra screws.
Verified review - view original
Verified OwnerThis was a complete waste of money. The holes aren't sized large enough to accept the through-bolts provided. I had to drill out the holes larger to accept the provided bolts. It shouldn't be this way; I decided not to use and go with a competitor's mount instead. Too much hassle; not well designed/executed.
Verified review - view original
Verified OwnerThis mount is way too complex and fragile. The tilt adjustment screw is minuscule and failed to hold my Garmin 1040 level, and then it easily stripped when I attempted to gently tighten it with a torque wrench. The tiny screws that actually secure the mount to the stem bolts are equally fragile. A better design would be to just have a longer stem bolt. Finally, the tiny screw needed to adjust the fore/aft position does not inspire confidence that the mount is going to adequately secure my $600 computer on bumpy terrain. You will need no less than 3 different allen key sizes just to install or adjust this thing. Love Cane Creek but this thing is a swing and a miss.
Verified review - view original
It doesn’t fit a Paul Components Boxcar stem. So close. It’s a cool unit. A little annoying that it uses 3 different Allen sizes and a T25.